Home > Plastic Squeeze Tube Sealers & Fillers >

SVS-J Table-Top Filling System - Product Code: SVS-J
Bottles, Jars and Tubes - SVS-J Table-Top Filling System
SVS-J Tabletop Filling System


 

SVS-J Tabletop Filling System
Bottles Jars and Tubes Packaging for Industry

Price excludes shipping

CONTACT COHEN FOR MORE INFORMATION: (424) 229-2018
Product Price : $5,550.00

Availability: Usually Ships in 4 to 6 Weeks
Product Code: SVS-J


Additional straight down filling nozzle [Add $250.00]

5 gallon stainless steel straight wall hopper with follower plate in lieu of standard cone hopper [Add $1,100.00]NOTE: This is used for thick products that cavitate in the hopper.

3/8” - Additional Cylinder And Piston Set [Add $1,000.00]

1/2” - Additional Cylinder And Piston Set [Add $1,000.00]

3/4” - Additional Cylinder And Piston Set [Add $1,000.00]

1” - Additional Cylinder And Piston Set [Add $1,000.00]

1.5” - Additional Cylinder And Piston Set [Add $1,100.00]

2” - Additional Cylinder And Piston Set [Add $1,150.00]

Qty:
Description and Pricing
 

SVS-J Tabletop Container Filling System


The filling
machine is a technologically advanced custom built single cylinder, pneumatically operated table-top filling system, designed and constructed as detailed in the following machine description. Made in the USA. Feel free to contact Mark Cohen at (424) 229-2018 with any questions.

PLASTIC SQUEEZE TUBE FILLER PRODUCT SUPPLY SYSTEM:
All metal product contact parts will be made of stainless steel, the piston and valve spool will be of Ertalyte and all "O"Rings and Gaskets will be made of Viton.
One straight down stainless steel nozzle.
One stainless steel air activated, positive closing style nozzle to help eliminate drips.
The plastic squeeze tube filler machine will be equipped with a 5 gallon stainless steel hopper.
Customer has choice of 3/4", 1", 1.5" or 2" diameter stainless steel cylinder for very accurate fills with guaranteed accuracies of +/- 1/2 of 1% of the fill weight. For correct cylinder sizing reference the chart.

DIAMETER SIZE

FILL VOLUME IN OUNCES

FILL VOLUME IN ML

MIN

MAX

MIN

MAX

3/8”

.06

.30

1.7

8.8

½”

.10

.54

2.9

15

¾”

.24

1.2

7

35

1"

.43

2.1

12

62

1 ½”

1.0

4.9

30

144

2"

2.0

8.7

60

257

NOTE: The above listed minimum fill volumes were obtained from a calculation using a 1" stroke.



PLASTIC SQUEEZE TUBE FILLER CONSTRUCTION:

The plastic squeeze tube, bottle, and jar fillingmachine frame is made of stainless steel.
All connections between the hopper and valve spool, cylinder and valve spool, and nozzle and valve spool will be either quick disconnect clamps or quick disconnect fittings to aid in the ease when disassembling and cleaning.

The SVS-J is also equipped with two types of machine cycle start mechanism, an auto cycle mode and a single cycle foot pedal control.

The SVS-J is also equipped with adjustable stroke rate control valves to allow the machines filling speed to be adjusted while the machine is in operation.

The SVS-J is pneumatically operated. The normal air required for operation is a constant 1.5 cfm @ 60 psi on either single or automatic cycle. NOTE: Air must be filtered and dry. The machine is designed to cycle 40 times per minute.

ADDITIONAL FEATURES:

SVS-J spare parts package consisting of valve and piston seals, quick clamp and gasket, and other parts deemed necessary for one year operation.
Maintenance manual is also included.
This machine will be designed and manufactured to fill a thick paste type product into tubes at estimated speeds of 5 to 20 cpm. Filling speeds are dependent upon the piston stroke length, the product being dispensed, the viscosity of the product and how the product reacts when it hits the bottom of the container.

THESE PRODUCTION OUTPUTS ARE ONLY ESTIMATES. TO RECEIVE ACTUAL MACHINE GUARANTEES ON PRODUCTION OUTPUTS THE MANUFACTURER WILL REQUIRE ONE GALLON OF EACH PRODUCT AND 6 CONTAINERS OF EACH SIZE YOU WISH TO FILL FOR TESTING.

SAMPLES:

The buyer will ship promptly to Bottles Jars and Tubes, Inc., approved sample containers, product and other manufacturing information as may be required for testing purposes. All cost relating to the shipment of sample containers and product are the buyer’s responsibility.

FINAL CONFIRMATION IS RELATED TO EVALUATION OF THE SAMPLES BY THE MANUFACTURERS ENGINEERING DEPARTMENT

PERFORMANCE AND QUALITY APPROVAL:

The Buyer is invited to assist in a test run and inspection of the equipment at the ALINE assembly facility before shipment. This will be at the buyer’s expense. Should the buyer decide not to attend the test, the machine will be considered as fully approved and then shipped shortly after testing.





Browse for more products in the same category as this item:

Plastic Squeeze Tube Sealers & Fillers